Position the floor jack under the Impala's large aluminum front sub-frame and lift the car until there is enough room to work underneath the car. Set the parking brake and block the rear wheels with the wheel chocks. How to Change the Transmission Oil in a 2006 Chevrolet Impala Activate the emergency brake and check the floor for any leaks.ħ quarts of Dexron III automatic transmission fluidġ0 millimeter and 1/2" socket and ratchet There should be a smooth transition from one gear to another. Start the vehicle and let it run for 5 to 10 seconds. Insert the funnel and add the 7 quarts of transmission fluid up to the full marker. Locate the red transmission cap under the hood. Re-install the pan by tightening the hex bolt and the securing bolts. Wipe any excess fluid with the disposable rag. Use the flat-head screwdriver to remove the gasket. Remove the remaining bolts and lower the pan. Use the rubber mallet to gently tap on the pan to drain the fluid. Unscrew the hex bolt using the 10 millimeter and 1/2" socket and ratchet. Place the oil pan under the transmission to catch the fluid. Look for a small plug with a hex bolt on the passenger side of the transmission, adjacent to the passenger side front tire. For additional security, add a brick behind each rear tire. Secure your vehicle with the jack stands on each side.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |